Getting started with a Rollei 35

No focusing assistance included. Take your best guess.
Post Reply
Julio1fer
Prolific Poster
Prolific Poster
Posts: 1417
Joined: Tue Mar 25, 2014 9:31 pm
Contact:

Getting started with a Rollei 35

Post by Julio1fer »

Always wanted to try one, and finally got one of these little gems locally, a TE Singapore-made version. The test roll was to get acquainted with the camera. It feels strange having to leave the shutter cocked to collapse the lens. Otherwise it is more convenient than I expected.

Goofed big time with my bulk loaded short roll, did not tape it well enough, and the roll ended fully wound in the take-up spool, sticky tape included. No way to rewind it in the camera. Had to take the film out in a darkened place, fortunately no great harm done.

A few shots from a walk in the Rambla close to noontime, hazy but strong sun. Mostly at f/11. Film was FP4+, developed in DK-50 1+3. I either overexposed or overdeveloped a bit, some negatives were on the dense side of too much.

Checking messages
Image

Parking not allowed
Image

Fence for sand dunes building
Image

Sanitation duct
Image

This is a central crop, about 1/8 of negative area. Preparing for kitesurfing or something similar.

Image

Looks like a keeper camera for casual and travel shooting, very light, decent lens. Yet more practice is needed, in order to get used to the uncommon controls.

Oh yes, the camera. Excuses for the lousy picture.

Image


User avatar
PFMcFarland
Super Member
Super Member
Posts: 2464
Joined: Tue Apr 29, 2014 11:02 pm
Contact:

Re: Getting started with a Rollei 35

Post by PFMcFarland »

Nice! Some fine example images, too.

The hardest accessory I had finding was the flash bracket that connects to the sync via the hot shoe. When I did locate one it was usually priced higher than the camera. I haven't seen one for sale in quite a long time except for generic ones that are advertised as the original. I just figured I'd shoot the camera upside down when using flash.

PF


Waiting for the light
Julio1fer
Prolific Poster
Prolific Poster
Posts: 1417
Joined: Tue Mar 25, 2014 9:31 pm
Contact:

Re: Getting started with a Rollei 35

Post by Julio1fer »

Quirky place for a shoe, indeed. However if you shoot this camera upside down, the negatives will look the normal way (i.e. same orientation as frame numbers), as a compensation for your efforts. Unique ergonomics.

Very hard to find a PX6 battery, maybe several LR44 would fit. Must try that.


User avatar
PFMcFarland
Super Member
Super Member
Posts: 2464
Joined: Tue Apr 29, 2014 11:02 pm
Contact:

Re: Getting started with a Rollei 35

Post by PFMcFarland »

Julio1fer wrote: ↑
Sat Nov 21, 2026 9:40 pm
Quirky place for a shoe, indeed. However if you shoot this camera upside down, the negatives will look the normal way (i.e. same orientation as frame numbers), as a compensation for your efforts. Unique ergonomics.

Very hard to find a PX6 battery, maybe several LR44 would fit. Must try that.
Does it require perhaps a PX27? If so, you should look for an EXELL S27PX 6V Silver cell. Exell supplies all types of replacements for photographic batteries. https://www.exellbattery.com/ and they are available from Amazon if you shop at that site.

My model (35 S) takes the old PX625 which I can get from eBay sellers, though I need to do a price comparison to see if ordering direct is less expensive.
But it's kind of a mute subject as the meter doesn't work.

PF


Waiting for the light
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest