When a mediocre lens dies

Small mirrorless camera systems, including some with interchangeable lenses.
Post Reply
User avatar
melek
Prolific Poster
Prolific Poster
Posts: 1121
Joined: Mon Mar 24, 2014 7:04 pm
Contact:

When a mediocre lens dies

Post by melek »

I think most kit lenses are average at best, but when it dies, it still irks me.

A few months back, this is what I saw when I turned on my Olympus Pen E-PL1.
14-42_bad_01.jpg
In almost all cases, the lens is kaput. Because it's a kit lens, there isn't much reason to repair it. (I tried, and it didn't work.)

From what I've read, it has something to do with a ribbon cable, and there are at least three tiny ones that I could see, and possibly more. In any case, the cost of repair certainly would be more than it's worth.

Short version: I bought a replacement on eBay for $125, which was attached to a lightly used E-PL6. The camera had an engraving on the side, which probably was why the price was low. I lightly sanded the engraving. It's still there but for the most part unnoticeable.

The E-PL6 is a much improved camera compared with the E-PL1. Sensor is better. Shoot at a higher frame rate. LCD tilts, It still accepts the VF-1 electronic viewfinder.

Pretty much a win-win.
pl6vpl1.jpg
pl6vpl1_2.jpg
The white spots in the corner of the LCD are air bubbles under the screen protector that I added. I put screen protectors on the LCD monitors of all of my digital cameras.
engraving.jpg
The engraving looks worse than it is. I'll probably fill it with epoxy at some point. I was going to try to remove the side panel and replace it with a polished piece of wood, but it's part of the entire back plate.

I'm trying to turn the E-PL1 into a pinhole camera. I need to work on the distance of the pinhole to the sensor.
pinhole.jpg


-Mike Elek
User avatar
PFMcFarland
Super Member
Super Member
Posts: 2391
Joined: Tue Apr 29, 2014 11:02 pm
Contact:

Re: When a mediocre lens dies

Post by PFMcFarland »

At least it was the lens that packed it in, and not the camera. I got my first DSLR as a rear cap on a macro lens, and the only thing I had to do to get it back into operation was purchase a battery and charger.

PF


Waiting for the light
User avatar
Philip
Enthusiast
Enthusiast
Posts: 494
Joined: Tue Mar 25, 2014 2:24 pm
Contact:

Re: When a mediocre lens dies

Post by Philip »

Nice replacement. I have a ten-year-old Pen EP-1 and, despite my hopes when I bought it, I have never liked it. Maybe I should turn it into a dedicated pinhole, too. :)


My Flickrs: http://www.flickr.com/flipflik (recent postings), or
- http://www.flickriver.com/photos/flipfl ... teresting/ (Flickr's calculation of my "most interesting" pics);
- http://www.flickr.com/photos/flipflik/s ... 879115542/ (what I like best).
User avatar
GrahamS
Prolific Poster
Prolific Poster
Posts: 1068
Joined: Thu Mar 27, 2014 10:49 am
Contact:

Re: When a mediocre lens dies

Post by GrahamS »

" I put screen protectors on the LCD monitors of all of my digital cameras."
Is that a glass screen protector? My Best Beloved had a glass screen protector on her Nikon DSLR once upon a time. She inadvertently bumped it against a table corner and didn't notice that the glass had broken into jagged shards. When she next lifted the camera to her eye, the shards of glass cut her face! I promptly consigned all of the glass screen protectors from our cameras to the bin!


GrahamS
Age brings wisdom....or age shows up alone. You never know.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest