Ilford F.P.4. Plates.
Posted: Sat Aug 31, 2019 3:30 pm
Hi all,
From the same seller I got my Fotopan F 10x15 I got a box of 10 dry plates from 1967, Ilford F.P.4. panchromatic.
F.P.4. Dry plates from 1967.
First I got problems since they are quarter plates and my holders where too big so I found 3 Voigtlander ones for the American market and I just received them... Still a problem finding a solution to keep the plates in place in the SP-445, that's why the clip mark.
First shot is ASA5, over exposed minimum 2 stops.
Dandelion.
This test was to find out the correct ASA after 50 year and which is the emulsion side... next photo was taken with the emulsion on the other side so the walls from the holder at developing made strange and cool effect, but some parts where not developed at all. Shot as ASA 10.
My B.
As conclusion I will shot one more plate rating it as ASA 25 and placing the emulsion side correctly, it seems it's the matte side by inspecting by fingers. Soviets as not the same, normally the non emulsion side is pretty dirty from the paper it carries and only by orientation it's possible to know the emulsion side.
Any advice before next try is welcome
Thank you for looking,
Alex
From the same seller I got my Fotopan F 10x15 I got a box of 10 dry plates from 1967, Ilford F.P.4. panchromatic.
F.P.4. Dry plates from 1967.
First I got problems since they are quarter plates and my holders where too big so I found 3 Voigtlander ones for the American market and I just received them... Still a problem finding a solution to keep the plates in place in the SP-445, that's why the clip mark.
First shot is ASA5, over exposed minimum 2 stops.
Dandelion.
This test was to find out the correct ASA after 50 year and which is the emulsion side... next photo was taken with the emulsion on the other side so the walls from the holder at developing made strange and cool effect, but some parts where not developed at all. Shot as ASA 10.
My B.
As conclusion I will shot one more plate rating it as ASA 25 and placing the emulsion side correctly, it seems it's the matte side by inspecting by fingers. Soviets as not the same, normally the non emulsion side is pretty dirty from the paper it carries and only by orientation it's possible to know the emulsion side.
Any advice before next try is welcome
Thank you for looking,
Alex